• Welcome to MAXMECH Group | since 1987

Wet Mix Macadam Plant

  • Salient Features
  • Technical Specifications
  • Gallery
  • Request a Quote
  • Quick Contact

Salient Features

Capacity: 60, 100, 120, 160, 200, 250, 300 & 350 TPH

  • “MAXMECH” WMM Plant has several outstanding technical features which make them the right choice for construction work
  • “MAXMECH” Pugmill unit is lined on the inside with Ni-hard (Nickle Hard ) replaceable tiles as against normal M.S liner plate used by other manufacturers. These lines are for inner shell & side plate, As a result of this minimum wearing occurs resulting in longer life of the Pugmill as compared to others manufacturers
  • "MAXMECH" Pugmill arm & tips are of heavy duty design (inspired by German design) to achieve homogeneous mix as against small size of other manufacturers. As a result of the minimal wear & tear occurs, which in turn leads to Economical Operational Cost of the plant
  • "MAXMECH" Pugmill is designed to take overload of 20% in continuous operation without affecting the quality of mix
  • Due to low power requirement in 'MAXMECH" plant against higher power consumption of other manufacturers there will be substantial saving in consumption of diesel in D.G Set; reflecting power efficient design
  • All conveyor structures of "MAXMECH" plant are fabricated from heavy duty structure with adequate cross strengthening as against single channel provided by other manufacturers
  • The volume of "MAXMECH" Pugmill is comparatively higher than other manufacturers resulting in better mix and fluent discharge of mix material
  • "MAXMECH" provides all important inputs like; Electric Motor, Gear Box, Bearing etc. of standard and approved make, as against local make inputs provided by other manufacturers

Technical Specifications

SPECIFICATION UNIT MWMP-60 MWMP-100 MWMP-120 MWMP-160 MWMP-200 MWMP-250 MWMP-300 MWMP-350
FOUR BIN FEEDER
Bin Capacity Cum. 4.25 x 4 = 17 4.25 x 4 = 17 7.5 x 4 = 30 7.5 x 4 = 30 9 x 4 = 36 12 x 4 = 48 12 x 4 = 48 12 x 4 = 48
Bin Loading Width mm 2400 2400 2500 2500 2900 2900 3200 3200
Auxilary Conveyor Belt (Plain) mm / HP 500 / 2 500 / 2 500 / 2 500 / 2 500 / 2 500 / 2 600 / 3 600 / 3
Collecting Conveyor Belt (Plain) mm / HP 500 / 5 500 / 5 600 / 5 600 / 5 750 / 7.5 750 / 7.5 900 / 15 1000 / 15
Vibrator for Fine Agg. Bin HP 0.25 0.25 0.88 0.88 0.88 0.88 0.88 0.88
PUGMILL (MIXER)
Pugmill Volume Cum. 1.6 1.6 1.6 1.6 2 2 2.75 2.75
No. of Paddle Pairs (LH & RH) Pair 6 7 9 11 13 15 17 17
Pugmill Gear Box Elecon N.A. N.A. 6" SNU, R 10 : 1 6" SNU, R 10 : 1 7" SNU, R 10 : 1 8" SNU, R 10 : 1 9" SNU, R 10 : 1 9" SNU, R 10 : 1
Pugmill Gear Box PBL K-832 K-832 K-832 K-931 K-931 K-1031 K-1031 K-1231
Connected Load HP 10 15 20 25 30 40 50 60
Water Pump HP 1 1 2 2 3 3 5 5
GOB HOPPER
Capacity Kgs. N.A. N.A. 2000 2000 2000 2000 N.A. N.A.
Loadout Conveyor Belt 11.7 Mt. Long. mm / HP 500 / 5 500 / 5 600 / 5 600 / 7.5 750 / 10 750 / 10 900 / 15 1000 / 15
STORAGE SILO (OPTIONAL)
Capacity Ton N.A. N.A. 25 25 25 25 25 / 50 25 / 50
Loadout Conveyor Belt. 18.3 Mt. Long. mm / HP N.A. N.A. 600 / 7.5 600 / 7.5 750 / 10 750 / 10 900 / 15 1000 / 15
VIBRATING SCREEN (OPTIONAL)
Screen HP N.A. N.A. 2 2 3 3 5 5

SALES

SERVICES

SPARE PARTS

Quick Contact
Close