 |
|
|
|
|
|
|
|
‘MAXMECH’ Slipform Curbing Machine Model : MSK 9145 is a most versatile machine for making different types of Curb for highways, footpath upto 1220mm width & 150mm thk. small box gutters, etc.
The concrete for pouring into the mould should be of special mix design & should have slump of approx. 30 to 40mm for small section & 25 to 30mm for higher section.
The machine is basically self-propelled driven by a compact water cooled diesel engine, having a Rubber Padded Crawler track, of 910c/c & 240mm width at front driven by a powerful hydraulic motor with gear box. |
|
|
|
|
|
|
|
|
|
|
|
At rear there are 4 idle solid tyres rubber wheels 2 on each side mounted equalizer beam. Complete machine is mounted on three hydraulic jacks, one at front & two at rear. The front portion carries crawler track and can also be steered by a horizontal hydraulic cylinder. The rear portion carries engine with rubber wheels one left hand side of the machine the mould box is suspended from the rear portion with receiving hopper for concrete. Two or three hydraulic needle vibrators are fixed inside the receiving hopper for consolidation of concrete before entering the mould chamber. The mould chamber is closed at front end & open at rear end with approx. length of 1500mm and with proper design so that on the machine propel in forward direction the concrete curb is formed smoothly in slipform manner.
Two electronic sensors are fitted on side of mould box, the front one is for steering & second rear one is for grade. The machine follows the stringline which is laid & pre landed by theodolite along the length of the curbing line slope sensor is fitted on the control panel at the centre of the machine.
The mould is of quick fit design & can be changed within 30 minutes max.
|
|
|
|
|
|
|
| Technical Specification |
| Description |
Size/Specification |
| Overall length |
3810 mm |
| Overall width |
2320 mm |
| Overall height |
1870 mm |
| Curb Clearance |
300 mm |
| Concrete charging height |
1125 mm |
| Wheel base |
2055 mm |
| Track |
1330 mm |
| Crawler Track size at front |
1 no. 910 x 240 mm Rubber padded crawler steel chain |
| Solid Rubber Tyres at rear |
4 nos. |
| Sensor |
| Slope |
Remote slope set |
| Grade |
Fully Proportional |
| Steering |
Fully Proportional |
| Vibrators |
Imported needle vibrators are provided in the feeding
hopper |
Qty.- 2 standard
3 (optional) |
|
|
| Prime Mover |
Specification |
MITSUBISHI make
Model :- S4L2 – V363JGHS |
4 Cylinder water cooled diesel engine
24.1 kw @ 3000 rpm, ISO 15550 |
|
|
|
 |
|
|
|
|
|